Welcome Guest [Login|Register]
Language
Currency
Shop by Category
Shopping Cart
Your shopping cart is empty.
0Items in cart:
0.0g / 0.00ozShipping Weight:
C$0.00Total:

GY-521 3-Axes Gyroscope + Accelerometer Module w/ InvenSense MPU-6050

Location: /Miscellaneous

GY-521 3-Axes Gyroscope + Accelerometer Module w/ InvenSense MPU-6050

Click image to zoom.

Shown images are ilustrative only. Please refer to manufacturer's website and/or available datasheet for accurate information.

QtyUnit PriceLot Price
1C$6.7840C$6.78
2C$5.4340C$10.87
5C$4.1240C$20.62
10C$2.8540C$28.54
DIPMICRO DISCONTINUED

Product Information
dipmicro Code DE4187
Manufacturer Generic
Stock Type New
Restockable? No
Shipping Weight 4.0g / 0.141oz
Ship Cost Canada CP O/S Letter C$4
Ship Cost USA USPS First Class $4
 
Technical Summary
More Info PS-MPU-6000A-00v3.4.pdf

GY-521 Features

  • Chip: MPU-6050
  • Onboard LDO regulator. GY-521 operating voltage: 3V ~ 5V
  • Communication: I2C
  • Built-in 16bit AD converter, 16bit data output
  • Gyroscopes ranges: +/- 250 500 1000 2000 degree/sec
  • Acceleration ranges: +/- 2g, +/- 4g, +/- 8g, +/- 16g
  • Pin Spacing: 2.54mm (0.1in)

GY-521 Reference Schematic

GY-521 Schematic

MPU-6050 Overview

MotionInterface™ is becoming a “must-have” function being adopted by smartphone and tablet manufacturers due to the enormous value it adds to the end user experience. In smartphones, it finds use in applications such as gesture commands for applications and phone control, enhanced gaming, augmented reality, panoramic photo capture and viewing, and pedestrian and vehicle navigation. With its ability to precisely and accurately track user motions, MotionTracking technology can convert handsets and tablets into powerful 3D intelligent devices that can be used in applications ranging from health and fitness monitoring to location-based services. Key requirements for MotionInterface enabled devices are small package size, low power consumption, high accuracy and repeatability, high shock tolerance, and application specific performance programmability – all at a low consumer price point.

The MPU-60X0 is the world’s first integrated 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor™ (DMP) all in a small 4x4x0.9mm package. With its dedicated I2C sensor bus, it directly accepts inputs from an external 3-axis compass to provide a complete 9-axis MotionFusion™ output. The MPU-60X0 MotionTracking device, with its 6-axis integration, on-board MotionFusion™, and run-time calibration firmware, enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices , guaranteeing optimal motion performance for consumers. The MPU-60X0 is also designed to interface with multiple non-inertial digital sensors, such as pressure sensors, on its auxiliary I2C port. The MPU-60X0 is footprint compatible with the MPU-30X0 family.

The MPU-60X0 features three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and three 16-bit ADCs for digitizing the accelerometer outputs. For precision tracking of both fast and slow motions, the parts feature a user-programmable gyroscope full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps) and a user-programmable accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g.

An on-chip 1024 Byte FIFO buffer helps lower system power consumption by allowing the system processor to read the sensor data in bursts and then enter a low-power mode as the MPU collects more data. With all the necessary on-chip processing and sensor components required to support many motion-based use cases, the MPU-60X0 uniquely enables low-power MotionInterface applications in portable applications with reduced processing requirements for the system processor. By providing an integrated MotionFusion output, the DMP in the MPU-60X0 offloads the intensive MotionProcessing computation requirements from the system processor, minimizing the need for frequent polling of the motion sensor output.

Communication with all registers of the device is performed using either I2C at 400kHz or SPI at 1MHz (MPU-6000 only). For applications requiring faster communications, the sensor and interrupt registers may be read using SPI at 20MHz (MPU-6000 only). Additional features include an embedded temperature sensor and an on-chip oscillator with ±1% variation over the operating temperature range.

By leveraging its patented and volume-proven Nasiri-Fabrication platform, which integrates MEMS wafers with companion CMOS electronics through wafer-level bonding, InvenSense has driven the MPU-60X0 package size down to a revolutionary footprint of 4x4x0.9mm (QFN), while providing the highest performance, lowest noise, and the lowest cost semiconductor packaging required for handheld consumer electronic devices. The part features a robust 10,000g shock tolerance, and has programmable low-pass filters for the gyroscopes, accelerometers, and the on-chip temperature sensor.

For power supply flexibility, the MPU-60X0 operates from VDD power supply voltage range of 2.375V-3.46V. Additionally, the MPU-6050 provides a VLOGIC reference pin (in addition to its analog supply pin: VDD), which sets the logic levels of its I2C interface. The VLOGIC voltage may be 1.8V±5% or VDD.

MPU-6050 Applications

  • BlurFree™ technology (for Video/Still Image Stabilization)
  • AirSign™ technology (for Security/Authentication)
  • TouchAnywhere™ technology (for 'no touch' UI Application Control/Navigation)
  • MotionCommand™ technology (for Gesture Short-cuts)
  • Motion-enabled game and application framework
  • InstantGesture™ iG™ gesture recognition
  • Location based services, points of interest, and dead reckoning
  • Handset and portable gaming
  • Motion-based game controllers
  • 3D remote controls for Internet connected DTVs and set top boxes, 3D mice
  • Wearable sensors for health, fitness and sports
  • Toys